Skip to Content
  1. All products
  2. Adhesives
  3. Akemi Mixing Nozzle For Gel Mix 50 ml 2:1 cartridges
  4. Adhesives
Pricelist: General Price List (USD) Pricelist
Pricelist: General Price List (USD) Pricelist

Akemi Mixing Nozzle for Gel Mix 50 mL 2:1 Cartridges

This is a genuine AKEMI® static mixing nozzle (mixer tip) for AKEMI’s 50 mL, 2:1 Gel Mix cartridge system — used with products such as AKEPOX® 5010 Gel Mix. The nozzle threads onto the cartridge and, as the two-component adhesive is pushed through the gun, its internal spiral blends Part A and Part B to a homogeneous, ready-to-apply mix — no hand-stirring and no guesswork on the ratio. Mixing tips are a single-use consumable: fit a fresh nozzle for each new bond so a set nozzle never blocks the cartridge.

  • Genuine AKEMI® accessory — matched to the 50 mL 2:1 Gel Mix cartridge
  • Static spiral mixing — blends resin and hardener as you dispense
  • Correct ratio, every time — consistent 2:1 mixing with no manual stirring
  • Single-use consumable — a fresh tip keeps each application clean
Property Detail
Brand Akemi
Type Static mixing nozzle / mixer tip (disposable)
Fits / Compatibility AKEMI® 50 mL 2:1 Gel Mix cartridges (e.g. AKEPOX® 5010 Gel Mix)
Contents Mixing nozzle accessory (consumable)
  • Genuine AKEMI® replacement tip for the 50 mL 2:1 Gel Mix cartridge system
  • Internal spiral statically mixes both components as the adhesive is dispensed
  • Delivers a consistent 2:1 blend with no manual stirring and no separate spatula
  • Applies the adhesive directly where it is needed for clean, controlled bead placement
  • Single-use design — a fresh nozzle avoids cured adhesive blocking the cartridge

What's included: AKEMI® mixing nozzle for the 50 mL 2:1 Gel Mix cartridge (consumable accessory).

Compatible with: AKEMI® 50 mL Gel Mix cartridges that use the 2:1 mixing ratio — for example AKEPOX® 5010 Gel Mix (50 mL).

Also needed: the matching AKEMI® skeleton gun / adapter for 50 mL 2:1 cartridges (sold separately) to dispense the cartridge through this nozzle.

This is an accessory / mixer tip only — adhesive cartridge and dispensing gun are not included.

Accessory item (mixer tip) — not a chemical. Mixing nozzles are single-use: fit a fresh nozzle for each application and discard once the adhesive has set inside. Refer to the safety data sheet of the AKEMI® adhesive being dispensed, and wear gloves and eye protection when handling the cartridge.