A two-step Tenax care kit that first lifts rust staining from calcite-based stone, then restores the polished gloss. The rust remover uses Tenax's stone-safe chelate chemistry to draw iron staining out of marble, travertine, and limestone without the harsh mineral acids that can pit or dull the surface; the marble polishing restorer then rebuilds a high-gloss finish. Always follow the included product instructions and test in an inconspicuous area first.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Kit Type | Two-step — rust removal + gloss restoration |
| Step 1 | Rust remover (stone-safe chelate chemistry) |
| Step 2 | Marble polishing / restorer compound |
| Suitable Surfaces | Marble, travertine, limestone, and other calcite-based stone |
| Rust Remover Action | Chelate formula draws out iron / rust staining |
| Restorer Action | Abrasive polishing compound rebuilds gloss |
| Restorer Mixing | Mix polishing powder with water to a toothpaste consistency |
| Restorer Coverage | ~30–60 g (1–2 tbsp) polishing powder per square meter |
| Restorer Finish | High-gloss polished |
| Method | Treat the rust stain, then buff the area to restore shine |
Removing iron and rust staining from marble and other calcite stone, then re-polishing the treated area back to its original gloss. Apply the rust remover per the label dwell time, rinse, allow to dry, then work the polishing restorer with water and a felt pad. Calcite stone may need re-sealing after treatment.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
