Skip to Content
  1. All products
  2. Adhesives
  3. Polyester - Vinyl Ester - Acrylic
  4. Akemi Marble Filler 1000 Transparent L-Special - Gel-Like Knife-Grade Polyester Filler (Quart)
  5. Polyester - Vinyl Ester - Acrylic
Pricelist: General Price List (USD) Pricelist
Pricelist: General Price List (USD) Pricelist
Akemi Marble Filler 1000 Transparent L-Special - Gel-Like Knife-Grade Polyester Filler (Quart)

Akemi Marble Filler 1000 Transparent L-Special - Gel-Like Knife-Grade Polyester Filler (Quart)

(0 review)
Gel-like, knife-grade filler, does not change its consistency by stirring, keeps its stability even in case of higher temperatures for bonding and filling of natural stone in a vertical position and for modelling corners and edges.
$ 45.59 $ 45.59
$ 45.59

Terms and Conditions
Shipping: 2-3 Business Days
Contact Us
Documents
Akemi Marble Filler 1000 Safety Datasheet.pdf Akemi Marble Filler 1000 Technical Datasheet.pdf

Akemi Marble Filler 1000 Transparent L-Special — Knife-Grade Polyester Adhesive (1 kg)

Akemi Marble Filler 1000 Transparent L-Special is a knife-grade, two-component polyester adhesive and filler designed for marble, granite, and natural-stone fabrication. The transparent base lets fabricators tint to match a wide range of stones, and the knife-grade body stays where it is troweled, making it the go-to product for filling pinholes in granite, gluing seams, and bonding mitred countertop edges. The 1 kg unit is the standard shop size for active production.

Features

  • Two-component polyester — mix with hardener at use
  • Knife-grade body for vertical and horizontal application
  • Transparent base — tint to match granite, marble, and engineered stone
  • Shop-standard for pinhole fill, seam glue, and mitre bonding
  • 1 kg can — production shop size
  • Premium German formulation from Akemi
PropertyDetail
BrandAkemi
Part NumberPOLY.10710
ProductMarble Filler 1000 Transparent L-Special
ChemistryTwo-component polyester (resin + hardener)
ConsistencyKnife-grade
Color BaseTransparent (tintable)
Container1 kg can
ApplicationGranite / marble / natural stone fill, seam, mitre bond
  1. Verify the substrate is clean, dry, and free of dust, oil, and sealer residue.
  2. Mix the resin and hardener at the ratio specified on the product label and SDS.
  3. Tint with Akemi-compatible color paste if needed for stone color match.
  4. Apply with a clean putty knife, working into the void or joint without trapping air.
  5. Let cure per the label cure time at the ambient shop temperature.
  6. Sand or polish back to the surrounding stone surface.
  7. Reseal mixing tools immediately to extend their service life.
  • Read the product Safety Data Sheet (SDS) before opening the container.
  • Wear chemical-resistant gloves, ANSI Z87 eye protection, and appropriate respiratory protection per the SDS.
  • Use only with adequate ventilation. Solvent and resin-based products may release VOCs during application and cure.
  • Keep out of reach of children and pets.
  • Store in a cool, dry place in the original sealed container; follow the SDS storage temperature range.
  • Dispose of empty containers and unused product per local hazardous-waste regulations.
  • Polyester resins contain reactive monomers; use only with fan ventilation or in a vented spray booth.
  • Mix only the quantity needed within the pot life — exotherm during cure can be significant.

Always read the product Safety Data Sheet (SDS) before use. Wear chemical-resistant gloves and eye protection. Use only with adequate ventilation. Follow all local regulations for storage and disposal of chemical products.