$ 460.99
$ 460.99
$ 460.99
Double Bevel Breaker Bit
The Diamax RDBB is part of Diamax stone fabrication tooling is engineered for professional shops producing countertops, vanity tops, and architectural stone. This product is shape decorative profiles on stone slab edges using CNC routers or hand-held routing systems.
Manufacturer overview: Double Bevel Breaker Bit.
Features
- Diamax Diamax series tooling
- Manufacturer model code: RDBB
- Engineered for professional stone-fabrication workflows
- Designed for router bits applications
- Use only on equipment rated for the tool's operating speed and cooling method (wet vs. dry)
| Property | Detail |
|---|---|
| Brand | Diamax |
| Family | Diamax |
| Model / Part Number | RDBB |
| Vendor Category | Grinders/Shapers |
| Product Type | Router Bits |
- Mount the bit in the router or CNC spindle with the correct collet.
- Use water cooling at the cut; profile bits run hot without it.
- Match the spindle RPM to the bit diameter as printed on the bit body.
- Make multiple passes for deep profiles rather than one heavy cut.
- Rinse the tool with clean water after wet use to flush slurry from the matrix.
- Air-dry before storage; do not store wet tools in sealed containers.
- Inspect the tool for cracks, chipping, or excessive wear before every shift.
- Do not exceed the maximum RPM printed on the tool body.
- Replace the tool when cut rate drops noticeably or visible damage appears.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator. Follow OSHA silica-exposure rules and the tool manufacturer's operating instructions when fabricating stone.