Skip to Content

Satellite City Hot Stuff Pro Kit HK-2 — Complete 2 oz CA Glue Set with NCF Quick Accelerator & Debonder

(0 review)
66.64 66.64
66.64
  • Brand
Terms and Conditions
Brand Satellite City

Satellite City Hot Stuff Pro Kit HK-2 — Complete 2 oz CA Glue Set with NCF Quick Accelerator & Debonder

The Hot Stuff Pro Kit HK-2 is a complete cyanoacrylate (CA) glue system in one box. It pairs all three Hot Stuff viscosities — thin Hot Stuff Original, medium gap-filling Super T and thick Special T, each in a 2 oz bottle — with a 6 oz NCF Quick aerosol accelerator and a 2 oz Super Solvent debonder, plus two extra applicator spouts and overcaps. Together they give the fabricator, installer and repair pro full control over cure speed, bond strength and gap fill for bonding, seaming and chip repair.

PropertyDetail
BrandSatellite City (Hot Stuff)
ProductHot Stuff Pro Kit HK-2
SKUHK-2
Manufacturer Part Number117
Hot Stuff Original (Thin)2 oz — 3 cps (water-thin), sets in ~5 seconds on tight, non-porous joints
Super T (Medium)2 oz — 200–300 cps (syrup-like), gap-filling, sets in ~10–25 seconds
Special T (Thick)2 oz — 1,150–1,500 cps, maximum gap fill, ~20 sec with accelerator / ~60 sec without
AcceleratorNCF Quick aerosol, 6 oz — speeds cure and lets glue cure on contact
DebonderSuper Solvent, 2 oz — dissolves cured CA glue for cleanup and un-bonding
Extra Applicator TipsTwo extra spouts and overcaps
Shipping Weight1.3 lb
Case Quantity24 kits (34 lb per case)
Shelf Life1 year
Country of OriginUnited States
Shipping RestrictionContinental United States only, UPS Ground
  • Complete CA glue system in one box — nothing else to buy to start bonding
  • Three CA-glue viscosities — thin, medium and thick — for any bond gap or joint fit
  • Full 2 oz bottles of each glue, not sample sizes
  • 6 oz NCF Quick aerosol accelerator cures glue on contact and speeds the slower thick grades
  • 2 oz Super Solvent debonder included for cleanup and releasing accidental bonds
  • Two extra spouts and overcaps keep every bottle dispensing cleanly
  • Bonds wood, metal, rubber, vinyl, ABS, PVC, stone and more

Bonding, seaming and chip or scratch repair on stone, plus general shop use on wood, metal, rubber, vinyl, ABS and PVC. Use thin Hot Stuff for tight, well-fitting joints; Super T for small gaps; and Special T for larger gaps or vertical work. Apply NCF Quick accelerator to cure on contact, and use the Super Solvent debonder to clean up or release bonds. Working on natural stone where a green bloom would show? Choose the HSK-2 kit instead — it ships the NCF Stone (NCFS-6) accelerator formulated for that job. Follow Satellite City instructions and work in a ventilated area.

Wear appropriate PPE. Follow manufacturer instructions and safety regulations. Ships to the continental United States only, via UPS Ground.