$ 76.32
$ 76.32
$ 76.32
The Alpha® Tuck Point Wheel is specifically designed for brick re-pointing and flash installation. This dry cutting wheel fits on 4”, 4-1/2” and 7” grinders. Masons and brick re-pointers will find the Alpha® Tuck Point Wheel to be very aggressive and long lasting. The Alpha® Tuck Point Wheel is segmented with a very hard bond that resists the abrasive mortar commonly used in brick laying. The Alpha® Tuck Point Wheel simplifies brick re-pointing and flash installations.
- Can Be Used Wet or Dry
- Virtually Dust-Free Application with Ecoguard Type W5 and Vacuum
- Formulated for Aggressive Cutting and Long Life
- Best Tuck Pointing Blade on the Market
- Reliable Proven Performer
The Alpha® Tuck Point Wheel is specifically designed for brick re-pointing and flash installation. This dry cutting wheel fits on 4”, 4-1/2” and 7” grinders. Masons and brick re-pointers will find the Alpha® Tuck Point Wheel to be very aggressive and long lasting. The Alpha® Tuck Point Wheel is segmented with a very hard bond that resists the abrasive mortar commonly used in brick laying. The Alpha® Tuck Point Wheel simplifies brick re-pointing and flash installations.
Features
- Can Be Used Wet or Dry
- Virtually Dust-Free Application with Ecoguard Type W5 and Vacuum
- Formulated for Aggressive Cutting and Long Life
- Best Tuck Pointing Blade on the Market
- Reliable Proven Performer
| Part No. | Size | Thickness | Maximum RPM | Arbor(s) |
|---|---|---|---|---|
| TP0478 | 4" | 6.0mm | 14,500 | 7/8", 20mm, 5/8" |
Tuckpointing
Question :
The Alpha® Tuck Point blade is a dry blade, can it be used wet?
Answer :
Yes. Wet cutting will generally increase the life of the blade and help keep harmful dust (Silica) out of the air.
Question :
Can I use the Alpha® Tuck Point blade on the Alpha® AWS-125 Wet Stone Cutter?
Answer :
Yes. Only the 4” Alpha® Tuck Point blade will fit onto the AWS-125 Wet Stone Cutter since this particular blade’s arbor is 7/8” to 5/8” and is compatible with the AWS-125 flange.
Question :
What is the blade thickness of the Alpha® Tuck Point blades?
Answer :
The segment thickness of these blades is 1/4”.
Question :
Can I use the Alpha® Tuck Point blade to cut channels into granite for reinforcement rods?
Answer :
This application is not recommended. The Alpha® Tuck Point bond is designed for cutting soft abrasive material (mortar) and may not be suitable for granite. Alpha® recommends using the Alpha® Hot-Rod blade for Granite for cutting channels for reinforcement rods.
Question :
What size diameter blades does Alpha® offer for the Tuck Point blades?
Answer :
The Alpha® Tuck Point blade is available in 4” diameter.
Question :
What is the purpose of Alpha® Tuck Point blades?
Answer :
The purpose of Alpha® Tuck Point blades is to remove the deteriorating mortar from the joints of masonry walls. This is a common maintenance task for brick masonry.
| PartNo | Weight (Packaged) | UPS Code | Package Dimensions | Commodity Code | Country Of Origin |
|---|---|---|---|---|---|
| TP0478 | 0.70 | 749173462122 | 8in x 5.5in x 0.5in | 8202.91.0000 | Japan |
Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.