Skip to Content

Aardwolf WSDA01 Water Swivel Drill Adaptor — R 1/2 in

The Aardwolf WSDA01 is a water-feed swivel adaptor for wet diamond core drilling. It delivers cooling water through the spinning drill chuck to the diamond core bit. Built for stone, concrete, and masonry contractors running wet core bits on hand drills and stands.

Features

  • R 1/2 in threaded connection for standard core bit shanks
  • Internal water swivel passes coolant through the spinning shaft
  • Reduces diamond bit wear and slab chipping during wet drilling
  • Compact body fits handheld drills and lightweight drill stands
  • Replaceable seals support long service life
  • Brass and steel construction for shop durability
  1. Thread the WSDA01 onto the drill spindle until snug.
  2. Connect the inlet hose to a clean cold water supply.
  3. Mount the diamond core bit to the lower R 1/2 in thread.
  4. Open the water supply before starting the drill.
  5. Begin drilling at low pressure and let the diamonds cut.
  6. Wear eye protection, gloves, and a dust mask throughout the cut.
Property Detail
Brand Aardwolf
Part Number WSDA01
Thread R 1/2 in
Function Water swivel drill adaptor
Application Wet diamond core drilling

Use with R 1/2 in shank diamond core bits on hand drills and lightweight drill stands. Suitable for granite, marble, concrete, and masonry wet drilling.

Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.