$ 5.802,36
$ 5.802,36
$ 5.802,36
-
Model
Aardwolf ARGL-500 Vacuum Glass Lifter
The Aardwolf ARGL-500 series is a single-pad vacuum lifter optimized for glass, polished stone, and engineered slab handling. The 500 mm rubber pad seals on smooth surfaces and supports vertical rotation for installation. Available in DC (battery) and DS (dual-circuit safety) configurations.
Features
- Single 500 mm rubber pad for smooth-surface lifting
- ARGL-500DC — DC battery powered, cordless operation
- ARGL-500DS — dual-circuit redundant vacuum for safety
- Manual pad rotation and tilt for glazing installation
- Vacuum gauge and audible alarm on low pressure
- Suitable for glass, polished granite, and quartz panels
- Compact frame with overhead lifting eye
ARGL-500DC — ARGL-500DC DC Powered Vacuum Glass Lifter (Single System)
| Property | Detail |
|---|---|
| Working Load Limit (Horizontal) | 1,102 lb (500 kg) |
| Working Load Limit (Vertical) | 882 lb (400 kg) |
| Vacuum Pads | Four; 12 in diameter circular |
| Rotation | Manual 360 deg in 45 deg steps |
| Tilt | Manual 90 deg in 15 deg grid |
| Power | 12V Lithium-Ion battery |
| Safety | Audio/visual alarm, automatic vacuum replenishment |
ARGL-500DS — ARGL-500DS DC Powered Vacuum Glass Lifter (Dual System)
| Property | Detail |
|---|---|
| Working Load Limit (Horizontal) | 1,102 lb (500 kg) |
| Working Load Limit (Vertical) | 882 lb (400 kg) |
| Vacuum Circuits | Two independent circuits (double redundancy) |
| Vacuum Pads | Four; 12 in diameter circular |
| Rotation | 360 deg in 45 deg increments |
| Tilt | 4-bar tilting; manual 90 deg in 15 deg grid |
| Power | Two 12V M12B6 Lithium-Ion batteries; ~2 hr continuous |
| Charging Time | 2.5 hr |
| Safety | Audio/visual alarm, dual circuit failover |
- Charge the battery (DC variant) and clean the panel surface.
- Center the pad on the glass or stone and press down to seal.
- Engage the vacuum pump and confirm the gauge reads safe.
- Lift, tilt, and rotate the panel as needed for placement.
- Release vacuum only when the panel is fully supported.
- Wear cut-resistant gloves and safety glasses when handling glass.
Flat glass panels, polished granite, polished marble, engineered quartz, and porcelain slabs. Not for textured or honed surfaces.
Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.
Özellikler
| Model | ARGL-500DC, ARGL-500DS |