$ 496,53
$ 496,53
$ 496,53
-
Option
Alpha® is excited to introduce a new electric stone cutter, called the ESC-150, which is equipped with a powerful motor capable cutting 1-1/4” (3cm) stone slabs in one pass. In addition, Alpha® recognized the need for a quality electric portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without the time-consuming setup. Also, it is great for sink-hole cutting and groove-cutting for rodding applications. The ESC-150 includes a kink-free water hose for improved maneuverability of the stone cutter. The flexibility of the hose helps reduce operator fatigue and improves the operation. The Alpha® ESC-150 comes with a built-in dust gate making it dustless when connected to a HEPA vacuum. It can utilize a variety of consumables including the Alpha® Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods and 1/8” fiber glass rods. For marble applications, a Libero 5” blade is recommended since most marble slabs are 3/4” (2cm) thick or less. Alpha® offers a carriage assembly that fits on the Alpha® Guide Rail System to support the application of making precise miter cuts for the perfect lamination.
Alpha® is excited to introduce a new electric stone cutter, called the ESC-150, which is equipped with a powerful motor capable cutting 1-1/4” (3cm) stone slabs in one pass. In addition, Alpha® recognized the need for a quality electric portable stone cutter that is capable of miter cutting of 1-1/4” (3cm) materials with ease, so that any stone fabricator can use it when miter cuts are required, without the time-consuming setup. Also, it is great for sink-hole cutting and groove-cutting for rodding applications. The ESC-150 includes a kink-free water hose for improved maneuverability of the stone cutter. The flexibility of the hose helps reduce operator fatigue and improves the operation. The Alpha® ESC-150 comes with a built-in dust gate making it dustless when connected to a HEPA vacuum. It can utilize a variety of consumables including the Alpha® Katana 6” for porcelain panels and slabs, Hot-Rod 4” for 1/4” steel rods and 1/8” fiber glass rods. For marble applications, a Libero 5” blade is recommended since most marble slabs are 3/4” (2cm) thick or less. Alpha® offers a carriage assembly that fits on the Alpha® Guide Rail System to support the application of making precise miter cuts for the perfect lamination.
Features
- Powerful Motor For Use On Granite, Quartz Surfaces, Marble, Limestone, Concrete & Sintered/Porcelain Slabs
- Capable of Miter Cutting 1-1/4” (3cm) Material w/Ease
- Kink-Free Water Hose for Easy Maneuverability and Reducing Operator Fatigue
- Great For Sink-Hole Cutting, Groove Cutting/Rodding
- Comes with A Built in Dust Gate for Dustless Cutting When Connected to A HEPA Vacuum
- Miter Cutting Kit available with ESC-150/ESC-250
- One Year Tool Warranty*
| Specification | Data |
|---|---|
| Model | ESC-150 / ESC-250 |
| Rating | 110/220 Volts |
| Amperage | 11.2A / 5.5A |
| Power | 1200W |
| No Load Speed (min-1) | 10,000 RPM |
| Weight | 11.30 lbs (5.12 kgs) |
| Arbor | 7/8" (22.23mm) |
| Cutting Disc Diameter | 6" (150mm) |
| Max. Cutting Depth | 2" (50.88mm) |
| Cord | 15ft (4.5m) Single Phase |
| Plug Type | A (110V) / C (220V) |
| Item | Quantity |
|---|---|
| Side Handle | 1 |
| Screw (M6x30-Left) | 1 |
| Flange-3 | 1 |
| Water Hose Assembly (15ft / 4.5m) | 1 |
| Water Quick Coupler w/ Shut-off Valve | 1 |
| Carbon Brush Set | 1 |
| Water Valve Assembly | 1 |
| SS Flat Head Screw (M4x10) | 3 |
| Ground Fault Circuit Interrupter | 1 |
| End Cap | 1 |
| T-Handle Wrench | 1 |
| Open-End Wrench (17mm) | 1 |
| Easy On-Easy Off Sleeve | 1 |
| Self-stick Felt Strip Set | 1 |
| Hex. Wrench (5mm) | 1 |
| Part No. | Size | Maximum RPM | Type | Arbor(s) | Description |
|---|---|---|---|---|---|
| ESC-150 | 6" | 10,000 | 110V | 7/8" (22.23mm) | Electric Wet/Dry Stone Cutter |
| ESC-250 | 6" | 10,000 | 220V | 7/8" (22.23mm) | Electric Wet/Dry Stone Cutter |
ESC 150 MiterCutting
Question :
What kind of vacuum cleaner shall I use with ESC-150?
Answer :
You need to use HEPA Vacuum according to OSHA’s Table 1. Please see link below for details. https://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=1270
Question :
What is the warranty on the ESC-150?
Answer :
One year warranty (See manual for details)
Question :
How can I get the parts list and schematic for the ESC-150?
Answer :
Visit our website at www.alpha-tools.com or call at 800-648-7229.
Question :
Can I use the ASC-5CSM Carriage Assembly on the ESC-150?
Answer :
No, you cannot use the ASC-5CSM Universal Carriage System due to the fact it is designed for ESC-125 which is a 5” stone cutter. The ESC-150 requires a larger carriage which is the ASC-6CSM.
Question :
Why does the ESC-150 come with two locations for the anti-vibration side handle?
Answer :
Alpha® provided two positional locations for the side handle for user comfort and stability during the cutting applications.
Question :
When I use as a dry cutting application, dust breaches from the bottom of the stone. How can I prevent dust issue?
Answer :
When a diamond blade cuts through the stone, dust will be kicked out from the bottom of the slab before it comes up to the surface of slab. You can put a substrate such as another stone slab or Styrofoam sheet to encapsulate the edge of diamond blade so that dust would be kicked up toward the point of a dust suction.
Question :
Without TT Ruler Guide, how can I cut straight line?
Answer :
You have two options if you would like to take an advantage of guide to cut straight line. One is to use the Alpha® Guide Rail and Carriage System. Another is using Alpha® Spike Ruler if the cut is less than 3ft.
| PartNo | Weight (Packaged) | UPS Code | Package Dimensions | Commodity Code | Country Of Origin |
|---|---|---|---|---|---|
| ESC-150 | 13.65 | 749173621413 | 14in x 10.5in x 8in | 8467.22.0020 | China |
| ESC-250 | 13.65 | 749173621468 | 14in x 10.5in x 8in | 8467.22.0020 | China |
Özellikler
| Option | 110V, 220V |